Ipv4 Sfm Information - ZyXEL Communications RGS Series User Manual

5.4.40 IPv4 SFM Information

Each page shows up to 99 entries from the IGMP SFM Information table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from the beginning of
the IGMP SFM Information Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the IGMP SFM
Information Table. Clicking the
closest next IGMP SFM Information Table match. In addition, the two input fields will - upon a
button click - assume the value of the first displayed entry, allowing for continuous refresh with the same start
address.
The will use the last entry of the currently displayed table as a basis for the next lookup. When the end
is reached the text "No more entries" is shown in the displayed table. Use the
Object
VLAN ID
Group
Port
Mode
Source Address
Type
Hardware Filter/Switch
214
button will update the displayed table starting from that or the
VLAN ID of the group.
Group address of the group displayed.
Switch port number.
Indicates the filtering mode maintained per (VLAN ID, port number, Group Address)
basis. It can be either Include or Exclude.
IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128.
Indicates the Type. It can be either Allow or Deny.
Indicates whether data plane destined to the specific group address from the source
IPv4 address could be handled by chip or not.
Buttons
Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Refreshes the displayed table starting from the input fields.
Updates the table starting from the first entry in the IGMP SFM Information Table.
Updates the table, starting with the entry after the last entry currently displayed.
Description
button to start over.