ZyXEL Communications RGS Series User Manual page 164

Action Parameters
164
IPv4: Protocol IP protocol number: (0-255, 'TCP' or 'UDP') or 'Any'.
Source IP Specific Source IP address in value/mask format or 'Any'. IP and Mask are
in the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and 255.
When Mask is converted to a 32-bit binary string and read from left to right, all bits
following the first zero must also be zero. If a port is configured to match on
DMAC/DIP, this field is the Destination IP address.
IP Fragment IPv4 frame fragmented option: 'Yes', 'No' or 'Any'.
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of values or
'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for
IP protocol UDP/TCP.
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable
for IP protocol UDP/TCP.
IPv6: Protocol IP protocol number: (0-255, 'TCP' or 'UDP') or 'Any'.
Source IP 32 LS bits of IPv6 source address in value/mask format or 'Any'. If a port is
configured to match on DMAC/DIP, this field is the Destination IP address.
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of values or
'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
Sport Source TCP/UDP port :( 0-65535) or 'Any', specific or port range applicable for
IP protocol UDP/TCP.
Dport Destination TCP/UDP port :( 0-65535) or 'Any', specific or port range applicable
for IP protocol UDP/TCP.
CoS Class of Service: (0-7) or 'Default'.
DP Drop Precedence
DSCP DSCP: (0-63, BE, CS1-CS7, EF or AF11-AF43) or 'Default'.
'Default' means that the default classified value is not modified by this QCE.
Buttons
Click to apply the configuration and move to main QCL page.
Click to undo any changes made locally and revert to previously saved values.
Return to the previous page without saving the configuration change.
Level: (0-1) or 'Default'.