System Log - ZyXEL Communications RGS Series User Manual

5.4.4

System Log

Each page shows up to 999 table entries, selected through the "entries per page" input field. When first visited,
the web page will show the beginning entries of this table.
The "Level" input field is used to filter the display system log entries.
The "Clear Level" input field is used to specify which system log entries will be cleared.
To clear specific system log entries, select the clear level first then click the
The "Start from ID" input field allow the user to change the starting point in this table. Clicking the
button will update the displayed table starting from that or the closest next entry match.
In addition, these input fields will upon a
allowing for continuous refresh with the same start input field.
The will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table. Use the
start over.
Object
ID
Level
Time
Message
176
button click - assume the value of the first displayed entry,
The identification of the system log entry.
The level of the system log entry. Info: The system log entry is belonged information
level.
Warning: The system log entry is belonged warning level.
Error: The system log entry is belonged error level.
The occurred time of the system log entry.
The detail message of the system log entry.
Buttons
Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Updates the table entries, starting from the current entry.
Flushes the selected entries.
Updates the table entries, starting from the first available entry.
Updates the table entries, ending at the last entry currently displayed.
button.
Description
button to