The Others Screen - ZyXEL Communications VMG Series User Manual

Figure 63 Network Setting > Wireless > WMM
The following table describes the labels in this screen.
Table 40 Network Setting > Wireless > WMM
LABEL
WMM of SSID1~4 Select On to have the Zyxel Device automatically give the wireless network (SSIDx) a priority level
WMM
Automatic
Power Save
Delivery(APSD)
Cancel
Apply

7.7 The Others Screen

Use this screen to configure advanced wireless settings, such as additional security settings, power
saving, and data transmission settings. Click Network Setting > Wireless > Others. The screen appears as
shown.
See Section 7.10.2 on page 140
Chapter 7 Wireless
DESCRIPTION
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia
Quality of Service) gives high priority to voice and video, which makes them run more smoothly.
If the 802.11 Mode in Network Setting > Wireless > Others is set to include 802.11n or 802.11ac,
WMM cannot be disabled.
Select this option to extend the battery life of your mobile devices (especially useful for small
devices that are running multimedia applications). The Zyxel Device goes to sleep mode to save
power when it is not transmitting data. The AP buffers the packets sent to the Zyxel Device until
the Zyxel Device "wakes up". The Zyxel Device wakes up periodically to check for incoming
data.
Note: This works only if the wireless device to which the Zyxel Device is connected also
supports this feature.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
for detailed definitions of the terms listed in this screen.
VMG/XMG Series User's Guide
133