Firmware Upgrade; Chapter 40 Firmware Upgrade; Firmware Upgrade Overview; The Firmware Screen - ZyXEL Communications VMG Series User Manual

40.1 Firmware Upgrade Overview

This screen lets you upload new firmware to your Zyxel Device. You can download new firmware
releases from your nearest Zyxel FTP site (or www.zyxel.com) to upgrade your device's performance.
Only use firmware for your device's specific model. Refer to the label on
the bottom of your Zyxel Device.

40.2 The Firmware Screen

Click Maintenance > Firmware Upgrade to open the following screen. Download the latest firmware file
from the Zyxel website and upload it to your Zyxel Device using this screen. The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the Zyxel
Device will reboot.
Do NOT turn off the Zyxel Device while firmware upload is in progress!
Figure 197 Maintenance > Firmware Upgrade
The following table describes the labels in this screen. After you see the firmware updating screen, wait
two minutes before logging into the Zyxel Device again.
Table 154 Maintenance > Firmware Upgrade
LABEL
Upgrade Firmware
Restore Default
Settings After
Firmware
Upgrade

Firmware Upgrade

DESCRIPTION
Select the check box to have the Zyxel Device automatically reset itself after the new firmware
is uploaded.
VMG/XMG Series User's Guide
C
H A P T E R
331
40