ZyXEL Communications VMG8823-BX0B Quick Start Manual

Quick Start Guide
ENGLISH
EN 1 Use the gray phone cable to connect the DSL port to a
DSL splitter (1-a) or directly to the telephone wall outlet.
OR
Use an Ethernet cable to connect the WAN port to a
gateway modem (1-b).
EN 2 Connect a phone to the phone port using the phone cable.
3 Connect a computer to the LAN port using the yellow
Ethernet cable.
4 Connect the power cable to the modem and press the power
button.
EN
5 INTERNET LED (5-a)
OFF - The Internet connection is not ready. GO to Internet
Setup.
PHONE LED (5-b)
OFF - The VoIP registration is not complete. Configure VoIP
settings.
Place your hand no more than 10 CM over the Zyxel Logo for
active LEDs to light up for 30 seconds (after you move your hand
away).
1/2
Dual-Band Wireless AC/N VDSL2
Hardware Connections
1
DSL PHONE1 PHONE2
DSL
1-a
Check the LEDs
5
The Internet connection is ready.
Proximity Sensor
All LEDs are turned off except power LED.
VMG8823-BX0B
VoIP Combo WAN IAD
OR
DSL PHONE1 PHONE2
PHONE1 LAN POWER
2 3 4
5-a
INTERNET ON
INTERNET OFF
Active LEDs are lit.
DSL PHONE1 PHONE2
WAN
1-b
POWER ON
5-b
PHONE1 ON
The VoIP registration is complete.
PHONE1 OFF
On for 30 seconds