Configure Static Route For Routing To Another Network - ZyXEL Communications LTE Series User Manual

Click Static DHCP Configuration in the Static DHCP Configuration screen.
3
Select Active and type the IP address you want to assign to your device.
4
Type the MAC Address of your device to which the LTE7460 assigns the IP address and click OK.
5
4.13 Configure Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to the
Zyxel Device's LAN. The router may be used to separate two area networks. This tutorial shows how to
configure a static routing rule for two network routings.
In the following figure, router R is connected to the Zyxel Device's LAN. R connects to two networks, N1
(192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1 network) to
Chapter 4 Tutorials
LTE Series User's Guide
65