Configuring Static Route For Routing To Another Network - ZyXEL Communications P-2812HNU-51c User Manual

3.10 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the Device's LAN. The router may be used to separate two department networks. This tutorial
shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the Device's LAN. R connects to two networks, N1
(192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1
network) to computer B (in N2 network), the traffic is sent to the Device's WAN default gateway by
default. In this case, B will never receive the traffic.
N1
P-2812HNU(L)-Fx Series User's Guide
A
R
N2
B
Chapter 3 Tutorials
71