The Guest/More Ap Screen - ZyXEL Communications VMG Series User Manual

Figure 58 Wireless > General: More Secure: WPA(2)-PSK
The following table describes the labels in this screen.
Table 34 Wireless > General: More Secure: WPA(2)-PSK
LABEL
Security Level
Security Mode
Generate
password
automatically
Password
Encryption
Timer

7.3 The Guest/More AP Screen

This screen allows you to configure a Guest wireless network that allows access to the Internet only
through the Zyxel Device. You can also configure additional wireless networks, each with different
security settings, in this screen.
Click Network Setting > Wireless > Guest/More AP. The following screen displays.
Chapter 7 Wireless
DESCRIPTION
Select More Secure to enable WPA(2)-PSK data encryption.
Select WPA-PSK/WPA2-PSK or WPA2-PSK from the drop-down list box.
Select this option to have the Zyxel Device automatically generate a password. The password
field will not be configurable when you select this option.
WPA(2)-PSK uses a simple common password, instead of user-specific credentials.
If you did not select Generate password automatically, you can manually type a pre-shared key
from 8 to 64 case-sensitive keyboard characters.
Click the Eye icon to show or hide the password of your wireless network. When the Eye icon is
slashed , you'll see the password in plain text. Otherwise, it's hidden.
Click this to show more fields in this section. Click again to hide them.
Select the encryption type (AES or TKIP+AES) for data encryption.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
The Timer is the rate at which the RADIUS server sends a new group key out to all clients.
VMG/XMG Series User's Guide
125