Configuring Static Route For Routing To Another Network - ZyXEL Communications P-660HNU-F1 User Manual

Thomas can also grant access to the computers of other members of his family and friends.
However, Josephine and others not listed in this screen will no longer be able to access the Internet
through the ADSL Device.
3.8 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the ADSL Device's LAN. The router may be used to separate two department networks. This tutorial
shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the ADSL Device's LAN. R connects to two
networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from
computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the ADSL Device's
WAN default gateway by default. In this case, B will never receive the traffic.
N1
ADSL Series User's Guide
A
R
N2
B
Chapter 3 Tutorials
71