The Reset Button - ZyXEL Communications VMG Series User Manual

See the following table to see how long you need to press the WLAN and WPS buttons on the Zyxel
Device.
Table 12 WLAN and WPA Buttons
MODEL
VMG1312-B10D
VMG3312-T20A
VMG3625-T20A
VMG3925-B10B
VMG3925-B10C
XMG3927-B50A
VMG3927-Bx0A
VMG8823-Bx0B
VMG8825-Bx0A
VMG8924-B10D

1.5.2 The RESET Button

If you forget your password or cannot access the Web Configurator, you will need to use the RESET
button to reload the factory-default configuration file. This means that you will lose all configurations
that you had previously. The password will be reset to the factory default (see the device label), and the
LAN IP address will be "192.168.1.1".
Make sure the POWER LED is on (not blinking).
1
To set the device back to the factory default settings, press the RESET button or until the POWER LED
2
begins to blink and then release it. When the POWER LED begins to blink, the defaults have been
restored and the device restarts.
See the following table to see how long you need to press the RESET button on the Zyxel Device.
Table 13 RESET Button
MODEL
VMG1312-B10D
VMG3312-T20A
VMG3625-T20A
VMG3925-B10B
VMG3925-B10C
XMG3927-B50A
VMG3927-Bx0A
VMG8823-Bx0B
VMG8825-Bx0A
VMG8924-B10D
Chapter 1 Introducing the Zyxel Device
WLAN BUTTON WPS BUTTON
One second Two seconds
More than two seconds More than five seconds
More than two seconds More than five seconds
Two seconds Two seconds
More than two seconds More than five seconds
More than one second More than one second
More than one second More than one second
More than two seconds More than five seconds
More than one second More than one second
More than two seconds More than five seconds
RESET BUTTON
One second
Five seconds
Five seconds
Ten seconds
More than five seconds
More than five seconds
More than five seconds
Five seconds
More than five seconds
Five seconds
VMG/XMG Series User's Guide
33