Table of Contents
Advertisement
User's Guide
Menu Options for Maintenance
Select the menus on the control panel as described below.
Settings > Maintenance
Print Head Nozzle Check:
Select this feature to check if the print head nozzles are clogged. The printer prints a nozzle check
pattern.
Print Head Cleaning:
Select this feature to clean clogged nozzles in the print head.
Ink Cartridge(s) Replacement:
Use this feature to replace the ink cartridges before the ink is expended.
Print Head Alignment:
Select this feature to adjust the print head to improve print quality.
❏ Vertical Alignment
Select this feature if your printouts look blurry or text and lines are misaligned.
❏ Horizontal Alignment
Select this feature if horizontal banding appears at regular intervals in your printouts.
Thick Paper:
Select On to prevent ink from smearing on your printouts, however, this may lower the print speed.
Paper Guide Cleaning:
Select this feature if there are ink stains on the internal rollers. The printer feeds paper to clean the
internal rollers.
Remove Paper:
Select this feature if there are still some torn pieces of paper inside the printer even after removing
jammed paper. The printer makes more space between the print head and the surface of the paper to
easily remove the torn pieces of paper.
Related Information
"Checking and Cleaning the Print Head" on page 98
&
"Aligning the Print Head" on page 99
&
"Cleaning the Paper Path for Ink Smears" on page 100
&
Menu Options for Paper Source Settings
Select the menus on the control panel as described below.
Settings > Paper Source Settings
Preparing the Printer
45
Advertisement
Table of Contents
