Table of Contents
Advertisement
User's Guide
Related Information
"Software Update Tools (EPSON Software Updater)" on page 105
&
"Uninstalling Applications" on page 107
&
Updating the Printer's Firmware Using the Control
Panel
If the printer is connected to the Internet, you can update the printer's firmware using the control panel. You can
also set the printer to regularly check for firmware updates and notify you if any are available.
1. Select Settings on the home screen.
2. Select System Administration > Firmware Update > Update.
Note:
Enable Notification to set the printer to regularly check for available firmware updates.
3. Check the message displayed on the screen, and then press the OK button to start searching for available
updates.
The printer starts searching for available updates.
4. If a message is displayed on the screen informing you that a firmware update is available, follow the on-screen
instructions to start the update.
Important:
c
❏ Do not turn off or unplug the printer until the update is complete; otherwise, the printer may malfunction.
❏ If the firmware update is not completed or is unsuccessful, the printer does not start up normally and
"Recovery Mode" is displayed on the LCD screen the next time the printer is turned on. In this situation, you
need to update the firmware again using a computer. Connect the printer to the computer with a USB cable.
While "Recovery Mode" is displayed on the printer, you cannot update the firmware over a network
connection. On the computer, access your local Epson website, and then download the latest printer
firmware. See the instructions on the website for the next steps.
Uninstalling Applications
Log in to your computer as an administrator. Enter the administrator password if the computer prompts you.
Uninstalling Applications - Windows
P
1. Press the
button to turn off the printer.
2. Quit all running applications.
Network Service and Software Information
107
Advertisement
Table of Contents
