Table of Contents
Advertisement
User's Guide
Important:
c
Do not load paper in the rear paper feed slot until the printer prompts you to do so. Doing so will result in the blank
paper being ejected.
1. Select rear paper feed slot as the Paper Source setting on the printer driver, make other print settings, and
then click Print.
2. A message is displayed on the control panel telling you to load paper. Follow the instructions below to load the
paper.
3. Open the rear paper feed slot.
4. Slide out the edge guides.
5. While holding a single sheet of paper at the center of the rear paper feed slot with the printable side facing up,
slide the edge guides to the edges of the paper.
Preparing the Printer
41
Advertisement
Table of Contents
