Printing A Network Status Sheet; Replacing Or Adding New Access Points - Epson WF-7211 User Manual

Table of Contents

Advertisement

User's Guide
❏ Make network settings on the computer that is on the same network as the printer using the installer. You can
run it from the following website.
http://epson.sn
> Setup
❏ You can register several passwords on an access point that uses the WEP security type. If several passwords are
registered, check if the first registered password is set on the printer.
Related Information
"Making Advanced Network Settings" on page 23
&
"Connecting to a Computer" on page 18
&
Message on the Network Environment
Message
*Multiple network names (SSID) that
match your entered network name (SSID)
have been detected. Confirm network
name (SSID).
The Wi-Fi environment needs to be
improved. Turn the wireless router off and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.

Printing a Network Status Sheet

You can check the detailed network information by printing it.
1. Load papers.
2. Select Settings on the home screen.
3. Select System Administration > Network Settings > Network Status > Print Status Sheet.
u
4. Press the
button.
The network status sheet is printed.

Replacing or Adding New Access Points

If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Network Settings
Solution
The same SSID may be set on several access points. Check the settings on the
access points, and change the SSID.
After moving the printer closer to the access point and removing any
obstacles between them, turn off the access point. Wait for about 10 seconds,
and then turn it on. If it still does not connect, see the documentation
supplied with the access point.
You can simultaneously connect up to four computers and smart devices in
Wi-Fi Direct (Simple AP) connection. To add another computer or smart
device, disconnect one of the connected devices first.
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wf-7210 seriesWf-7210dtw

Table of Contents