Remote Control Operation - Eiki PLC-XU101 Owner's Manual

Basic Operation

Remote Control Operation

For some frequently used operations, using the remote control is advisable.
Just pressing one of the buttons enables you to make the operation, and no need for calling up the On-Screen
Menu.
COMPUTER / VIDEO button
Press the COMPUTER or VIDEO button on the remote
control to select the input source.
For more detail, see pp.26, 35, 36.
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
KEYSTONE button
If a projected picture has keystone distortion, correct the
image with Keystone adjustment.
Press the KEYSTONE button on the remote control. The
keystone dialog box will appear.
Correct keystone distortion by pressing the Point
buttons. Keystone adjustment can be memorized. (p.42)
Reduce the upper width
with Point e button.
24
ed
Reduce the lower width
with Point d button.
Remote Control
COMPUTER
button
KEYSTONE button
POINT ed buttons
FREEZE button
• The arrows are white when there is no correction.
• The direction of the arrow being corrected turns red.
• The arrows disappear at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
• The adjustable range can be limited depending
on the input signal.
✔
Note:
See the next page for the other buttons.
•
/VIDEO