Cutting Media - Epson SureColor F9470H User Manual

Note: If the room temperature is too low and you send a print job with high ink density or a small number
of print passes, the print job may pause while the after heater warms up.
1. During printing, press the heat/dry menu button.
2. Press the OK button to select Heater Temperature.
3. Press the up or down arrow button to change the after heater temperature.
4. Press the OK button.
5. Press the back button until Ready appears on the LCD screen.
Parent topic: Media Handling
Related references
Media Setup Menu Settings

Cutting Media

When you finish printing, use a commercially available cutter to cut the media.
Warning: Be careful not to cut yourself when using cutters or other sharp blades. Also be careful
touching areas near the after heater since the after heater may be hot and you could be burned.
1. Press media setup button.
2. Press the OK button to select Feed to Cut Position.
51