9. Insert the two hooks on the new flushing pad into the slots and press the tab down until it clicks into
place.
10. Press the OK button.
11. Close the maintenance cover and press the OK button.
12. Press the up or down arrow buttons to select Yes and press the OK button to return the print heads
to the home position.
Parent topic:
Related references
Maintenance Precautions
Consumables and Replacement Parts
Related tasks
Moving the Print Head for Maintenance
Replacing the Media Edge Guides
If the media edge guides that came with your product become damaged or deformed, you need to
replace them.
Caution: Continued use of damaged or deformed media edge guides may damage the print heads.
1. Remove any media loaded in the product and turn off the product. Wait one minute before
continuing.
Maintenance
140