Epson SureColor F9470H User Manual page 83

Setting
Feeding Tension
Take-up Tension
Media Suction
Head Movement
Multi-Strike Printing
Feed Speed Limiter
Options
Lv1 to Lv8
Auto
Manual
Lv0 to Lv10
Data Width
Printer Full Width
Media Width
Off
2 to 8
On
Off
83
Description
Increase the value if creases appear in
media during printing.
Select for most media.
Select a value from Lv1 to Lv9.
Decrease the value if creases appear in
media during printing or ink adheres to
the back of the take-up roll. Increase the
value if thick media cannot be wound
correctly.
Select a value to increase the gap
between the print head and thin or
flexible media. If print quality is reduced
or media does not feed correctly, you
may need to lower the value.
Select to move the print heads within the
range of the print data's width.
Select to move the print heads within the
range of the printer's maximum media
width.
Select to move the print heads within the
range of the width of the loaded media.
Disable the feature.
Select the number of times each line is
printed.
Select if thin media wrinkles or tears
easily (print speed decreases).
Select for normal printing.