Moving or Transporting the Product
When moving the product, see these sections to prepare and move the product, and set it back up after
moving it.
If you need to transport the product a long distance, contact Epson support.
Preparing to Move the Product
Setting Up the Product After Moving
Preparing to Move the Product
Do the following before moving the product:
1. Remove any loaded media from the media feeding unit and auto take-up reel.
2. Turn off the product.
3. Remove the waste ink bottle.
4. Remove all cables.
5. Make sure the adjusters next to the casters are raised. Using a wrench, loosen the nut at the top of
each adjuster and turn the nut on the bottom counterclockwise until the adjuster raises off the floor.
153