Table of Contents
Advertisement
22. Grasp the tabs on the media edge guides on both sides and move them to the edges of the media.
Adjust the guides so the round holes are centered over the edges of the media as shown.
Caution: If your media is more than 0.02 inch (0.4 mm) thick, leave the media edge guides on the
sides of the product or they could damage the print head.
Note: Make sure to correctly position the media edge guides as shown here or your printouts may
contain banding, uneven tint, or stripes. Do not use the media edge guides if the sides of your
printouts are smudged or torn.
38
Advertisement
Table of Contents
