Epson SureColor F9470H User Manual page 80

Setting
Feed to Cut Position
Easy Media Setup
Screen Display
Media Remaining
Reset Print Length
Customize Settings
Select Media
Customize Settings options
Options
—
1 to 30
Media Remaining
Print Length
Print Remaining Length
Length
Remaining Alert
Manual Reset
Auto Reset
Current Settings
1 to 30
1 to 30
80
Description
Sends the end of the print to the cutting
groove.
Store new media settings.
Displays the length of the remaining roll
media in increments of 3.9 inches (0.1
m).
Displays the length per printed job in
increments of 39.4 inches (1 m).
Prints the amount of media remaining
on the current roll.
Enter the total roll length, from 3 to
1969 ft (1.0 to 600.0 m).
Enter the length at which the printer will
alert you to the amount of media
remaining, from 3 to 50 ft (1 to 15 m).
Resets the print length value to 0 when
you press the OK button.
Select Per Job to reset the print length
value to 0 for every new job.
If you select Off, you must manually
reset the value.
Selects the current media setting to
customize (see the next table).
Selects a stored media setting to
customize (see the next table).
Selects a stored media setting to use
for printing.