Moving The Print Head For Maintenance - Epson SureColor F9470H User Manual

3. Dip a fresh cleaning stick into the ink cleaner and let any excess cleaning solution drip into the cup.
Parent topic:
Related references
Maintenance Supplies

Moving the Print Head for Maintenance

Certain maintenance tasks require that you move the print head as described here before performing the
task.
Caution: Always move the print head as described here. Do not move the print head manually or you
may cause your product to malfunction.
1. When the product is turned on, press the
You see the Maintenance menu.
2. Press the down arrow button to select Head Maintenance and press the OK button.
3. Press the down arrow button to select Regular Cleaning and press the OK button.
The print head moves into maintenance position.
4. Perform your maintenance task as necessary.
Note: After 10 minutes, an alarm sounds to warning you that the print head is still in the maintenance
position. You also see a notice on the LCD screen telling you to clean the print heads after
maintenance. After completing your maintenance task, press the OK button to clean the print heads.
The alarm sounds again at 10 minute intervals if the print heads are not in the home position.
Preparing for Maintenance
maintenance button on the control panel.
97