Solving Printer Problems - Epson SureColor F9470H User Manual

LCD screen message
Maintenance Request
Replace Part
Now/Replace Part Soon
XXXXXXXXXX
Call For Service
XXX Error XXX
Power off and then on. If
this doesn't work, note
the code and call for
service.
Parent topic:
Related references
Where to Get Help
Environmental Specifications
Media Setup Menu Settings
Printer Setup Menu Settings
Related tasks
Replacing the Waste Ink Bottle
Replacing the Chip Unit and Refilling Ink
Cleaning the Print Head

Solving Printer Problems

Check these sections if you have problems operating your product.
Printer Does Not Turn On
LCD Screen Shuts Off
After Heater Shuts Off
Forgot the Administrator Password
Red Light Shines Inside the Printer
Solution
The indicated product part is nearing or at the end of its service life. Contact
Epson for support and provide them with the service code shown on the LCD
screen.
You must replace the part before printing again. If you continue to print, a call
for service occurs.
A call for service occurs when:
• The power cable is not connected securely
• An error occurs that cannot be cleared
When a call for service has occurred, the printer automatically stops printing.
Turn off the printer, disconnect the power cable from both the outlet and the
printer, and then reconnect them. Turn the printer on and off several times. If
the same call for service is displayed on the LCD screen, contact Epson for
support and provide them with the service code shown on the LCD screen.
Solving Problems
159