Safety During Ongoing Work Operations - Advantech DLTV72INT User Manual

2.7.

Safety during ongoing work operations

Users of the DLT-V72 must be trained by skilled personnel and instructed in the
operation of the device. All users must be familiar with all functions of the product they
come into contact with.
General
1. Do not use the DLT-V72 in explosion hazard areas.
2. Switch off the DLT-V72 if located in the vicinity of petrol stations, fuel
3. Switch off the DLT-V72 before using the interfaces underneath the
4. Switch off the DLT-V72 before replacing the battery pack.
The following applies when using the DLT-V72 on vehicles:
The vehicle driver is not permitted to operate the DLT-V72 while driving. Operating the
device can represent a distraction from driving operations and there is an increased risk
of accident.
The DLT-V72 must be disconnected from the vehicle battery while the vehicle battery is
being charged. Or it must be ensured that the maximum permitted input voltage of the
DLT-V72 is not exceeded.
DLT-V72 Series User Manual V2.74
depots,
chemical plants, etc.
antenna.
21 / 189
Safety Chapter