Sensitivity - Newland HR3260-CS User Manual

【Enter Setup】

Sensitivity

Sensitivity specifies the degree of acuteness of the scanner's response to changes in ambient
illumination. The higher the sensitivity, the lower requirement in illumination change to trigger the scanner.
You can select an appropriate degree of sensitivity that fits the ambient environment.
【Medium Sensitivity】
【High Sensitivity】
If the above four options fail to meet your needs, you may program the threshold value of illumination
change.
Illumination changes that reaches or surpasses the predefined threshold value will cause the scanner to
start a decode session. The lower the threshold value, the greater the sensitivity of the scanner. The
default threshold value is 2.
Set the threshold value of illumination change to 4:
1. Scan the Enter Setup barcode.
2. Scan the Threshold Value of Illumination Change barcode.
3. Scan the numeric barcode "4". (See the Digit Barcodes in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes in Appendix)
5. Scan the Exit Setup barcode.
**【Exit Setup】
【Threshold Value of Illumination Change (1~20)】
【Low Sensitivity】
【Enhanced Sensitivity】
32