Lan1/Lan2 Network Connection - ICP DAS USA LinPAC AM335 Series User Manual

2.6. LAN1/LAN2 Network Connection

The user can use 'ifconfig' command to get the IP address of LAN1/LAN2 and the SSH client
software (Putty or others) to connect the LinPAC AM335x PAC.
Step 1: Using 'ifconfig' command to check the IP address of LAN1/2. (Refer to the Figure 2.6-1)
Figure 2.6-1. Typing 'ifconfig' command to check the IP address
Step 2: User can use SSH client
software (Putty or others)
to connect the LinPAC.
(Refer to the Figure 2.6-2)
Figure 2.6-2. Using 'Putty' utility to connect the LinPAC
AM335X-PAC Series User Manual version 2.0.4 Page: 42
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com