ICP DAS USA LinPAC AM335 Series User Manual page 96

5.6.2.2. Messages in Traditional Chinese
To send a message in Traditional Chinese, first install the 'SMS Server tools' package. For more
detailed information regarding the installation of this package, refer to Section (d) of Chapter
5.6.2.1. Before you can send a message in Traditional Chinese the locale configuration for the
system must be changed to UTF-8 encoding. Refer to the procedure described below for details of
how to accomplish this.
Step 1: Use the following command to create a new system locale and write the
'LC_CTYPE=zh_TW.utf8' environment variables to the '/etc/default/locale' file, as
illustrated in Figure 5.6.2.2-1.
(Note: 'zh_TW.utf8' is the UTF-8 code for Traditional Chinese.)
# echo LC_CTYPE=zh_TW.utf8 > /etc/default/locale
Step 2: To apply the new configuration, type the 'reboot' command to restart the LinPAC.
Step 3: Use the '/etc/init.d/sms3
Step 4: Send a message to a mobile device using Traditional Chinese. The results of the
execution are as illustrated in Figure 5.6.2.2-2.
Figure 5.6.2.2-2. Sending an SMS message using Traditional Chinese
AM335X-PAC Series User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
Figure 5.6.2.2-1. Setting the system locale
start' command to start the SMSD service in the background.
version 2.0.4 Page: 96
E-mail: service@icpdas.com