Table of Contents
Advertisement
The procedure described below will help you to quickly and accurately complete the configuration
tasks.
Step 1: Ensure that the bridge-utils package is installed. If not, user can type
update' and
'apt-get install
Step 2: Before proceeding, back up the interfaces file found in the '/etc/network/' directory.
Step 3: Locate the interfaces-mstpd file in the '/etc/network/' directory and rename the file as
'interfaces'.
Step 4: Type
'vi
/etc/network/interfaces' to edit the file, and enable either a DHCP or a Static IP
address by configuring the network settings, as illustrated in Figure 7.2-2 below.
Step 5: Reset the network settings by entering the command 'reboot' or
'/etc/init.d/networking
AM335X-PAC Series User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
bridge-utils' command to install bridge-utils package.
Figure 7.2-2. Configuration for a Dual LAN network
restart'.
version 2.0.4
'sudo apt-get
Page: 122
E-mail: service@icpdas.com
Advertisement
Table of Contents
