ICP DAS USA LinPAC AM335 Series User Manual page 21

2.1.4.1. Installing the RJ-45 waterproof connector assembly
The LP-9x2x series is equipped with an RJ-45 waterproof connector to withstand contaminant in
the dusty environment.
The RJ-45 waterproof connector is optional for use with LAN1 port. If you do not need the RJ-45
waterproof connector, you can remove the cap and just plug in a regular Ethernet cable.
If you want to use the RJ-45 waterproof connector for protecting the connection, follow the
instructions below.
Step 1: Remove the RJ-45 connector from the RJ-45 cable.
Step 2: Feed the end of the RJ-45 cable through the (A) sealing nut, (B) rubber sealing insert, (C)
clamping ring, (D) cable gland base and (E) panel gasket.
AM335X-PAC Series User Manual version 2.0.4 Page: 21
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com