2.7.6. Serial Port configuration
Use the 'stty' command to query or configure the COM port. For example, to modify the baud
rate 9600 to 115200 bps via
/dev/ttyS1
port:
# stty -F /dev/ttyS1 ispeed 115200 ospeed 115200
Use the 'getsendreceive' command to query or configure the COM port. (Refer to Figure 2.7.6-1)
For example, the I-7060 module is connected with COM2 port of the LP-9x2x, and sending the
command '$01M' to query the module name which baud rate is 115200 bps connect with
/dev/ttyS0 port, it will get a response: '!017060'.
Figure 2.7.6-1. Use the 'getsendreceive' command to query or configure the COM port
AM335X-PAC Series User Manual
version 2.0.4
Page: 55
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: service@icpdas.com