Table of Contents
Advertisement
CV610-U3-V2 Manual
To reset the setting
To reset the setting, press the 1 (STD) button while holding down the L/R DIRECTION SET button.
Movement of the
Arrow button
Setting
camera
While holding down
Press
Note
The above setting only changes the signal emitted from the infrared remote controller, and does
not change the setting of the camera itself. Therefore, repeat the setting for each infrared remote
controller if you are using more than one infrared remote controller.
When the STANDBY lamp is blinking
If the camera is moved forcibly, or a fi nger or other object interferes with camera movement, the
camera may fail to memorize the pan/tilt position.
Press the PAN-TILT RESET button to reset the pan/tilt position.
www.marshall-usa.com
30
Advertisement
Table of Contents
