Pan / Tilt / Zoom Menu - Marshall Electronics CV610-U3-V2 User Manual

7.4 PAN / TILT / ZOOM Menu

The PAN TILT ZOOM menu is used to select the pan/tilt/ zoom mode.
DIGITAL ZOOM:
Set to DIGITAL ZOOM ON, 12X digital zoom is
activated.
You can set digital zoom to ON or OFF. When set
to OFF, digital zoom does not operate, and only
optical zoom is available. When set to ON, digital
zoom takes over after optical zoom reaches MAX
(10×). Up to 120× can be zoomed digitally.
When digital zoom is available, the resolution
decreases
ZOOM SPEED:
Set Zoom Speed value to from 1 to 8 (The speed from low to high), to change the speed of SLOW
ZOOM on remote controller.
ZOOM RATIO OSD (Zoom times display):
Set Ratio OSD to ON, the number of the zoom times that you are operating displays on screen.
ADAPTIVE PT:
Set to ON, Pan Tilt speed would be adaptive with the zoom range.
PRESET SPEED:
Set preset speed value from 0 to 5 to change the preset speed.
PAN DIR:
Camera horizontal Left and right orientation setting, option: Normal/Invert
TILT DIR:
Camera tilt up and down orientation setting, option: Normal/Invert
27