Table of Contents
Advertisement
Use Third party video conference software (UVC1.5 compliant).
The camera can be controlled by any third party UVC1.5 compatible video software. Use USB3.0
cable to connect the camera to the PC/device equipped with UVC1.5 compatible software, the
camera will be recognized automatically. Follow the instruction of the video software you are using.
You can control the camera via PC, Pad, Smartphone.
1. Install video client software on the computer that you want to use the camera on.
2. Use the USB3.0 cable to connect the camera to the computer. Connect the power adapter to
the camera and the power outlet.
3. Power on the camera, wait for a while, the camera will be recognized and installed automatically
by the computer. USB3.0 driver is not required for the camera.
4. Open the video client software (Here, we use ZOOM ROOM for example), on left bottom
under "Stop Video" setting, select video device from Camera list "MEI CV610-U3-V2".
5. On left bottom under "Mute" Audio setting, select video device from Microphone list "Digital
Audio Interface (MEI CV610-U3-V2)".
6. Interface of the setting page and terminology
of the setting items may vary according to
the video client software you are using.
7. You can have the video displayed after you
made above selection. Right Click mouse to
pull out action selection, to Request Camera
Control from the meeting group.
8. After you get approve from the meeting
group, the control intereface will pop up. You
can control the camera.
9. For camera control detail, please refer to
video software user guide.
www.marshall-usa.com
CV610-U3-V2 Manual
14
Advertisement
Table of Contents
