White Balance Menu - Marshall Electronics CV610-U3-V2 User Manual

EX-COMP (Exposure Compensation)
When MODE is set to one of FULL AUTO, SHUTTER PRI or IRIS PRI, set this item to ON to
enable exposure compensation. When you set EX-COMP to ON, LEVEL appear and you can
select the exposure compensation level from the following:
–7, –6, –5, –4, –3, –2, –1, 0, +1, +2, +3, +4, +5, +6, +7
If you set the level to 0, no exposure compensation effect to the image. Level +7 is the brightest
and –7 is the darkest compensation value.
When EX-COMP is set to OFF, exposure compensation does not effect added to the image.

7.2 WHITE BALANCE Menu

The WHITE BALANCE menu is used to select the white balance mode.
MODE (white balance mode)
Select the white balance mode from the following:
AUTO, INDOOR, OUT DOOR, OPW (One Push White
Balance), ATW (Auto Tracing White Balance), USER.
When you select USER, R. GAIN (red gain) and B.
GAIN (blue gain) appear. You can select each item in
the range from 0 to 255.
When you select the OPW (One Push White Balance)
Perform the following operations:
1. Place a white object (For example: A piece of white paper) in front of camera lens.
2. Press the HOME button of the infrared remote controller. The one-push white balance
adjustment is activated.
25