Marshall Electronics CV610-U3-V2 User Manual page 13

When the camera setting HDMI video format at 1080P50/1080P25/750P50, USB2.0 and USB3.0
resolution with frame rate are available as following list.
HDMI FORMAT
1080P50/1080P25/720P50
HDMI / DVI Video Signal
The camera can simultaneously stream HDMI video output with USB3.0 video output. The DVI port
on the rear panel is not for DVI video output but it is a composite port for multiple use. In order to
use HDMI video output, you need to use the Extension Module.
1. Connect the Extension Module to the camera composite port when the power is off. Turn on the
camera power, after the camera initializes, HDMI video signal can be activated automatically.
2. Connect HDMI cable in between the Extension Module and your HDMI display.
3. You now have HDMI video output.
4. You can use HDMI to DVI converter to obtain DVI video signal.
USB2.0
Frame Rate
Resolution
1920x1080
1280x720
1024x768
960x540
850x480
800x600
768x448 25P/10P
720x576
720x540
720x480
720x404
640x480
640x360
50P/25P/10P
352x288
www.marshall-usa.com
CV610-U3-V2 Manual
USB3.0
Resolution
10P 1920x1080
1280x720
1024x768
960x540
850x480
800x600
768x448
720x576
720x540
720x480
720x404
640x480
640x360
352x288
Frame Rate
50P/25P/10P
12