Product Standards; Product Certification; Global Certificates/Approvals - Michell Instruments Liquidew I.S. User Manual

APPENDIX C
Appendix C Hazardous Area Certification
The Liquidew I.S. Process Moisture Analyzer utilizes the
The Easidew PRO I.S is certified compliant to the ATEX Directive (2014/34/EU), the
IECEx scheme and SI 2016 No. 1107 UKCA product marking scheme for use within Zone
0, 1 and 2 Hazardous Areas and has been assessed as being so by CML Bv Netherlands
(Notified Body 2776) and EUROFINS CML UK (Approved Body 2503).
The Easidew PRO I.S is certified compliant to the applicable North American Standards
(USA and Canada) for use within Class I, Division 1 and Class I, ZONE 1 Hazardous
Locations and has been assessed as being so by QPS.
C.1

Product Standards

This product conforms to the Standards:
BS/EN60079-0:2012/A11:2013
BS/EN60079-11:2012
FM Class 3600:2018
FM Class 3610:2010
IEC60079-0:2011
IEC60079-11:2011
C.2

Product Certification

This product is attributed with the product certification codes:
C.3

Global Certificates/Approvals

ATEX
IECEx
UKCA
QPS
These certificates can be viewed or downloaded from our websites at:
www.processsensing.com & www.michell.com
48
Easidew PRO I.S. dew-point transmitter
ATEX, UKCA & IECEx
II 1G Ex ia IIC T4 Ga (-20 °C...+70 °C)
North American
IS, Class I, Division 1, Groups A, B, C & D, T4
Class I, Zone 0, AEx ia IIC T4 Gb, Ex ia IIC T4 Gb
Tamb +70 °C
SGS Baseefa 06ATEX0330X
IECExBAS 06.0090X
BAS21UKEX0014X
LR1507-10
Liquidew I.S. User Manual
CSA C22.2 No. 60079-0:19
CSA C22.2 No. 60079-11:14
CSA 61010-1-12(R2017)
UL61010-1
UL60079-0
UL60079-11
97092 Issue 6, July 2022