Menu Structure - Michell Instruments Liquidew I.S. User Manual

Liquidew I.S. User Manual
3.3

Menu Structure

The Liquidew I.S. main menu has a two level menu structure. There are three sub-
PUV = Press Upper Value (-46.7)
menus - LIQUID SETUP, OUTPUT SETUP
Dp PUV ppmV(I)
are not in the main menu and are accessed separately. These are described in detail in
following sections. See Figure 19 for the complete menu structure:
NOTE:
Pressure
Save Setting for exiting menu or selecting another alarm
Pressure
Save Setting before exiting menu or selecting another output
Temperature Unit (C or F) & Pressure Unit (Psig or Barg) set the units
for both Inputs and Outputs.
ISO & IGT selection for Natural Gas Calculations
Save Setting before exiting menu
Sets the 4-20mA range for the Dew point & Pressure
Transmitters, which are in the units selected in the display
menu above.
Save Setting before exiting menu
Transducer
Fixed Pressure Value in the units selected in the Display menu; used
for operation without a pressure transducer to calculate moisture
concentration values.
Save Setting before exiting menu
Michell Instruments
PUV LBMMSCF
represents the Main Reading Page
Select Alarms 1 to 4
Dp
ppmV(I)
Select Outputs 1 to 3
Dp
ppmV(I)
Fixed Value
and FAULT SETUP
PUV mg/M3
mg/M3
LBMMSCF
mg/M3
LBMMSCF
OPERATION
. The ALARM SETTINGS
ppmV(N) PUV
PUV
ppmV(N)
Fault
ppmV(N)
31