Command Line Interface; Outlet Commands - Dataprobe iBootBar iBB-DC8 Installation And Operations

8.2.

Command Line Interface

The Command Line Interface provides complete setup of all function of the iBootBar. Access the CLI either via the network interface using Telnet, or
via the modem or serial port using a terminal emulation program. Some commands of the CLI require administrative rights. These are indicated in the
table below.
8.3.

Outlet Commands

Command
get outlets
get outlet <1-8>
set outlet <1-8> <on/off/cycle>
get device <#1-#16/devname> outlet <1-8>
set device <#1-#16/devname> outlet <1-8>
<on/off/cycle>
set device <#1-#16/devname> outlet <1-8> name
<name>
get device <#1-#16/devname> outlet <1-8> initial.state
set device <#1-#16/devname> outlet <1-8> initial.state
<on/off/last>
iBootBar iBB-DC8 V1.5x
Description
Returns the status of ALL the outlets the user has rights to.
Displays all devices and outlets in a cluster configuration.
Returns the status of the iBootBar. This command is for iBootBars
not used in a cluster configuration. If used in a cluster, it is the
same as device #1. The user must have rights to the selected
outlet.
Sets the selected outlet to the selected state. The user must have
rights to the selected outlet. This command is for iBootBars not
used in a cluster configuration. If used in a cluster, it is the same
as device #1
Returns the status of the select outlet on the selected iBootBar.
Device is either the number of the device <#1 to #16> or the name
of the device, as set. Number sign (#) required. The user must
have rights to the selected outlet.
Sets the selected outlet on the selected iBootBar to the selected
state. The user must have rights to the selected outlet.
Sets the name of the selected outlet of the selected iBootBar. 20
characters max.
Get or set the initial state of the selected outlet of the currently
selected iBootBar. Initial state is the condition of the outlet when
the iBootBar is powered up.
Admin
No
No
No
No
No
Yes
Yes
Page 15
Fact Def
Outlet <#>
Last