Device Commands - Dataprobe iBootBar iBB-DC8 Installation And Operations

8.5.

Device Commands

Command
get devices / get all / get outlets
get device <#1-#16/devname>
set device <#1-#16 > name <name>
get cycle
set cycle <1-99>
get delay
set delay <1-99>
get console
set console timeout <30-3600/disable>
set console baudrate
<400/4800/9600/19200/38400/
57600/115200>
get modem
set modem countrycode <contrycode>
set device <0-16>
get device
iBootBar iBB-DC8 V1.5x
Description
This command displays a list of connected devices, and their current status.
Get device information. Displays the device name, and all outlet names and
current status
Set the name of the selected iBootBar. 20 characters max.
Get or set the cycle time in seconds.
Get or set the delay time in seconds.
Displays the current console configuration, Timeout and Baud Rate
Console can be set to automatically logout with no activity for 30 seconds to 1 hr
in seconds, or disabled.
The baud rate of the serial port. 400,4800,9600,19200 ,38400,57600,115200
bps
Gets the current settings of the modem. –M models only.
Sets the modem country code. –M models only.
See page 34 for a list of country codes.
Get / Set the device ID for cluster applications. A device ID of 0 for single
iBootBar applications. A device ID of 1 makes the unit a master, and a device
ID of 2-16 make the iBB a remote in cluster configurations. These commands
are only valid when directly connected to the iBootBar, rather than as remote
units in a cluster.
Admin
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Page 17
Fact Default
Dataprobe
10
1
120
115200
181 (USA)
0