Configuration; Setup & Control Utility - Dataprobe iBootBar iBB-DC8 Installation And Operations

8 outlet dc power switch

Hello, I am your AI assistant. How can I help you?

Table of Contents

7.1.

Setup & Control Utility

The iBootBar Setup and Control Utility (SCU) utility provides the easiest means to find and configure your

iBootBar for use. The SCU can:

1. Automatically discover multiple iBootBars on a local network

2. Add additional iBootBars, not on the local network

3. Download existing configurations from installed iBootBars

4. Save existing configurations for later use or as backup

5. Open saved configurations for change management

6. Clone saved configurations for replication of similar configurations in multiple iBootBars

7. Upload modified configurations to iBootBars

8. Control Power Outlets on one or more iBootBars throughout the network

The iBootBar Setup and Control utility is available on the iBootBar CD or download it from

http://dataprobe.com/support-ibb-dc8

Notes : iBB-DC8 units do not provide current monitoring. Reported current draw will report 0.0 amps in all

cases.

The Setup and Control Utility only operates with iBootBars attached to the network. iBootBars in a

cluster configuration can be configured using the setup and control utility, if they are attached to the

network.

V180808N

7. Configuration

iBB-DC8 Manual

Page 8

Table of Contents

Do you have a question about the iBootBar iBB-DC8 and is the answer not in the manual?