Oce Eco Solvent CS9060 User Manual page 97

4.8.2 Stop printing
If you want to stop printing, operate as follows.
Step 1 : Stop sending printing data from the computer to the printer.
Step 2 : Press the [Cancel] key on the operation panel.
The printer operates as follows.
Printer status
Printing
Receiving / Converting
Notes
•
If a large amount of data is saved on the printer, the operation panel may not return to Normal by a
single [Cancel] operation.
•
In such cases, wait a few seconds and press the [Cancel] key again.
4.8.3 Pause printing
It is possible to pause during printing.
Notes
•
If the printing operation is paused, the output quality can not be guaranteed.
Step 1 : Press the [-] key on the operation panel.
•
The printer pauses the operation.
•
"PrintRestart ==> ENTER" is displayed on the operation panel.
Step 2 : To restart the printing operation, press the [ENTER] key on the operation panel.
Operation with the [Cancel] key pressed
Terminates printing and deletes the non printed data.
Delete the received / analyzed data and the remaining incoming data
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
97 AP-75770 – Rev 1.1 -19/11/2007,