Oce Eco Solvent CS9060 User Manual page 84

4.7.1.4 Init.Adj.Print menu
Setup Item
100 mm to <250 mm> to 500 mm
Feed Length
4.7.1.5 Init.Adj.Change menu
Setup Item
200.0 mm to <250.0 mm> to 300.0
Init.
4.7.1.6 Confirm Print menu
Setup Item
100 mm to <250 mm> to 500 mm
Feed Length
4.7.1.7 Micro Adj. Print menu
Setup Item
Micro Adj. Print
4.7.1.8 Micro Adj.Change menu
Setup Item
–20 pulse to <0 pulse > to 20 pulse
Micro Adj.Change
Setting Value
•
•
—
Setting Value
mm
•
—
•
Setting Value
—
Setting Value
Printing
•
—
Setting Value
—
84
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
Description
Change the length (feed length) of the media feed
direction for the initial adjust print.
[Enter] key:
The setting value is determined.
"Printing" is displayed on the operation panel and the
initial adjust print is started.
After printing, the printer enters in the normal status.
[Cancel] key: Cancel the setting value and shift to the
previous hierarchy.
Description
Set up Initial Adjust Change.
[Enter] key: Save the setting and shift to the previous
hierarchy.
[Cancel] key: Cancel the setting and shift to the
previous hierarchy.
Description
Change the length (feed length) of the media feed
direction for the Confirm Print.
•
[Enter] key:
The setting is determined.
"Printing" is displayed on the operation panel and
initial adjust print is started.
After printing, the printer enters the normal status.
•
[Enter] key: Save the setting and shift to the previous
hierarchy.
•
[Cancel] key: Cancel the setting and shift to the
previous hierarchy.
Description
Print the PF pattern (micro adjustment) with a focus on the
micro adjustment value.
•
Printing interval: ± 1 pulse
[Cancel] key: Shift to the previous hierarchy.
If the printer is terminated during printing it shifts to the
previous level.
Description
Set up the Micro Adjustment Change.
•
[Enter] key: Save the setting and shift to the previous
hierarchy.
•
[Cancel] key: Cancel the setting and shift to the
previous hierarchy.
AP-75770 – Rev 1.1 -19/11/2007,