6.1.2 Adjust the print head
Notes
•
This printer was adjusted at factory shipment so that it obtains the optimum print quality.
•
Adjust the quality if the print quality change after the installation environment or the media is changed.
Step 1 :
Switch ON the printer and load the roll media.
Refer to: "Setting roll media"
Step 2 :
Confirm that the printer functions normally.
Step 3 :
Display the printing mode menu on the operation panel.
Step 4 :
Press the [Menu] key on the operation panel.
•
"Menu1: Setup>" is displayed on the operation panel.
•
The operation panel shifts to the Setup menu display.
Step 5 :
Press the [>] key on the operation panel.
•
"Set1: MediaType" is displayed on the operation panel.
User's Guide Océ CS9060 printer
123
AP-75770 – Rev 1.1 -19/11/2007,
Chapter 6: Troubleshooting