4.3.6 Replacing roll media
(1) Replacement time
Replace roll media if...
...the roll media runs out.
•
The operation panel displays "End of Roll".
•
If the media runs out during printing, the printer stops printing.
•
If you want to change the media type.
(2) Replacement steps
Notes
•
There are two optional winding systems available for the Océ CS9060
Unwinder/Winder 100
o
Motorized winding system with tensioning (T winder)
o
•
Please refer to the User Guide of the chosen system to know how to correctly replace roll media
Refer to the pricing sheet for more details of these systems.
Caution
•
Be careful that you don't get your fingers caught between the front cover and the printer if you
open or close the front cover.
1. Remove the installed roll media.
Step 1 :
Verify that
• the printer has been switched ON,
• the printer is in Normal mode, and
• The printer is NOT printing.
Step 2 :
Push the media hold lever backward (lever up).
Nr.
Name
1
Media loading lever
64
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
1
AP-75770 – Rev 1.1 -19/11/2007,