Oce Eco Solvent CS9060 User Manual page 99

4.8.5 Changing and confirming settings while printing.
4.8.5.1 Procedure for changing and confirming settings while printing.
Step 1 : Confirm that the printer is in one of the following conditions;
• Receiving
• Converting
• Printing
• Warming up
Step 2 : Press the [Menu] key on the operation panel.
•
"Menu 1: Print Start" is displayed on the operation panel
Notes
•
When print job is sent with "heaters OFF", no message "warming up" will be visible and no message
"Menu1: Print start" will be visible.
Step 3 : Press the [+] key or the [-] key to change or confirm settings.
Notes
•
Refer to: "Settings that can be changed or confirmed while printing" for more information on this topic.
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
99 AP-75770 – Rev 1.1 -19/11/2007,