Important Information; How To Use This Manual - Bender COMTRAXX CP9 Series Manual

1. Important information

1.1 How to use this manual

Before using the devices please read:
This manual. It describes:

– The properties of the devices
– The connection of the devices
– The functions of the web user interface for Bender gateways
The sheet "Safety instructions for Bender products"

The manuals of the system components

As well as, if the related interface is used:
The "BCOM" manual

The "BMS bus" manual

COMTRAXX® is a registered trademark of Bender GmbH & Co. KG.
Terms used
This manual explains Bender-specific terms and functions in detail. Familiarisation with general specialist IT
and network terminology is considered a prerequisite. These terms are therefore only explained briefly in this
manual. You will find more detailed explanations in the related specialist literature and on the Internet.
BCOM
BMS
Always keep this manual within easy reach for future reference.
To make it easier for you to understand and revisit certain sections in this manual, we have used symbols to
identify important instructions and information. The meaning of these symbols is explained below:
DANGER
WARNING
CAUTION
CP9xx_D00349_08_M_XXEN/02.2022
This manual is intended for qualified personnel working in electrical enginee-
ring and electronics.
Protocol for communication of Bender devices via an IP-based network
Bender measuring device interface (RS-485 interface with BMS protocol)
This signal word indicates that there is a high risk of danger, that will result in
death or serious injury if not avoided.
This signal word indicates a medium risk of danger that can lead to death or se-
rious injury if not avoided.
This signal word indicates a low level risk, that can result in minor or moderate
injury or damage to property if not avoided.
5