Warranty And Liability; Disposal - Bender COMTRAXX CP9 Series Manual

1.6 Warranty and liability

Warranty and liability claims in the event of injury to persons or damage to property are excluded if they can
be attributed to one or more of the following causes:
Improper use of the device.

Incorrect mounting, commissioning, operation and maintenance of the device.

Failure to observe the instructions in this operating manual regarding transport, commissioning, ope-

ration and maintenance of the device.
Unauthorised changes to the device made by parties other than the manufacturer.

Non-observance of technical data.

Repairs carried out incorrectly and the use of replacement parts or accessories not approved by the

manufacturer.
Catastrophes caused by external influences and force majeure.

Mounting and installation with device combinations not recommended by the manufacturer.

This operating manual, especially the safety instructions, must be observed by all personnel working on the de-
vice. Furthermore, the rules and regulations that apply for accident prevention at the place of use must be ob-
served.

1.7 Disposal

Abide by the national regulations and laws governing the disposal of this device. Ask your supplier if you are
not sure how to dispose of the old equipment.
The directive on waste electrical and electronic equipment (WEEE directive) and the directive on the restriction
of certain hazardous substances in electrical and electronic equipment (RoHS directive) apply in the European
Community. In Germany, these policies are implemented through the "Electrical and Electronic Equipment
Act" (ElektroG). According to this, the following applies:
Electric and electronic equipment are not to be included in household waste.

Batteries and accumulators are not to be included in household waste but must be disposed of in

accordance with the regulations.
Old electrical and electronic equipment from users other than private households which was introdu-

ced to the market after 13th August 2005 must be taken back by the manufacturer and disposed of
properly.
For more information on the disposal of Bender devices, refer to our homepage at
www.bender.de > Service & support.
8
Important information
CP9xx_D00349_08_M_XXEN/02.2022