Field Service; Training Courses; Delivery Conditions; Inspection, Transport And Storage - Bender COMTRAXX CP9 Series Manual

Important information
Please send the devices for repair to the following address:

1.2.3 Field service

On-site service for all Bender products
Commissioning, parameter setting, maintenance, troubleshooting for Bender products

Analysis of the electrical installation in the building (power quality test, EMC test, thermography)

Training courses for customers

Telephone
Fax
E-mail
Internet
*Available from 7.00 am to 8.00 pm 365 days a year (CET/UTC+1)
**Mo-Thu 7.00 am - 8.00 pm, Fr 7.00 am - 13.00 pm

1.3 Training courses

Bender is happy to provide training regarding the use of test equipment. The dates of training courses and
workshops can be found on the Internet at www.bender.de > Know-how > Seminars.

1.4 Delivery conditions

The conditions of sale and delivery set out by Bender apply.
For software products the "Softwareklausel zur Überlassung von Standard-Software als Teil von Lieferungen,
Ergänzung und Änderung der Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroin-
dustrie" (software clause in respect of the licensing of standard software as part of deliveries, modifications and
changes to general delivery conditions for products and services in the electrical industry) set out by the ZVEI
(Zentralverband Elektrotechnik- und Elektronikindustrie e. V.) (German Electrical and Electronic Manufacturer's
Association) also applies.
The delivery and payment conditions can be obtained from Bender in printed or electronic format.

1.5 Inspection, transport and storage

Inspect the dispatch and equipment packaging for damage, and compare the contents of the package with the
delivery documents. In the event of damage in transit, please contact Bender immediately.
The devices must only be stored in areas where they are protected from dust, damp, and spray and dripping
water, and in which the specified storage temperatures can be ensured.
CP9xx_D00349_08_M_XXEN/02.2022
Bender GmbH, Repair-Service,
Londorfer Straße 65,
35305 Grünberg
+49 6401 807-752**, -762 **(technical issues)/
+49 6401 807-753** (sales)
+49 6401 807-759
fieldservice@bender-service.de
www.bender.de
7