5. Measuring the Absorbance/Transmission
5.1 Switching to the Absorbance/ Transmission measuring mode
– Call up the setup measuring mode by actuating
5.2 Measuring the absorbance or transmission
– Call up the absorbance or transmission measuring
mode (depending on the selection in the abs./trm. %
5
menu) by actuating
.
1
.
– In the setup menu, call up the abs./trm. %
.
submenu
Selection of the measuring mode:
l
absorbance
l
transmission
Measuring mode, absorbance
Measuring mode, transmission
The transmission measurement is not described
separately in the following example as it
operates in exactly the same way as the absor-
bance measurement. However, the result of the
measurement is displayed as % Transmission
instead of A for Absorbance.
A measured reference absorbance is also effec-
tive in the measuring mode, transmission. It is
displayed as reference absorbance.
13